Fluval Aquarium Led: Parts; Important Safety Instructions - Fluval Roma Gebrauchsanleitung

READ THOROUGHLY PRIOR TO INSTALLATION
AND OPERATION

FLUVAL AQUARIUM LED: PARTS

A) 1 x TOP FRAME attached to the aquarium
B) CANOPY
• 2 x LIDS for opening and closing the aquarium (B1); 3 x LIDS for Venezia 350
• 1 x black aluminium beam (B2); 2 x Black Aluminium beam for Venezia 350
C) 1 x LED Strip Light + LED driver; 2 x LED Strip Light + LED drivers for Venezia 350
D) GLASS TANK
B2
C
D
B2
C
D

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To guard against injury, basic safety precautions should be observed when handling the LED Strip
Light, including the following:
1. For the complete enjoyment, use and understanding of this product,
ALL SAFETY INSTRUCTIONS
using. Failure to do so may result in loss of life and/or injury or damage to the unit.
2. DANGER – To avoid possible electrical shock, special care should be taken due to the close proximity of
the LED Strip Light to water. For each of the following situations, do not attempt repairs yourself; return
the appliance to an authorized service facility for service or discard the appliance. (See Customer Service
information at the end of this manual).
If the unit falls into the water, DON'T reach for it! First unplug it and then retrieve it. If the electrical
components of the appliance get wet, unplug the appliance immediately.
4
B1
A
Roma series
B1
A
Venezia 190
B2
C
Vicenza 180 and 260
D
B2
C
D
READ AND FOLLOW
and all important notices on the appliance before
B1
A
B1
A
Venezia 350