Preparing The Appliance - Silvercrest SSVS 1000 B2 Bedienungsanleitung Und Sicherheitshinweise

Preparing the appliance

♦
Wash the appliance in warm soapy water and dry it thoroughly before first
use .
♦
Place the appliance into a pot that has side walls with a height of approx .
15 cm . Fasten the appliance on the pot's sidewall by means of the pot clip
Set the
♦
Pour warm water into the pot until the water level is between the MIN and
MAX markings .
CAUTION – PROPERTY DAMAGE!
► Note that the water level rises when you add the food . Do not exceed the
MAX marking and ensure that the water level is always above the MIN
marking!
NOTE
► The water temperature should be as close as possible to the temperature
you require for cooking . This minimises the waiting time until the set tem-
perature is reached .
► The water should not be hotter than the required temperature, however .
► You can find the required temperatures in the list of cooking times (see sec-
tion Cooking times) .
CAUTION – PROPERTY DAMAGE!
► Before connecting the appliance, compare the connection data of the
appliance (voltage and frequency) on the rating plate with that of your
electrical supply . This data must correspond in order to prevent damage to
the appliance .
♦
Plug the mains cable
display
button symbol
NOTE
► The appliance is will not work if the heating element
In that case, "Er4" will light up on the display
■ 26
│ GB│IE
pot
onto a level, dry and slip-free surface .
into a power socket . You will hear a beep and the
lights up briefly . The button symbol
/
lights up white .The appliance is now ready for use .
glows red and the
is not in the water .
.
SSVS 1000 B2
.