Troubleshooting; Specifications - Yamaha YDS-150 Benutzerhandbuch

Setting the Reed and Ligature
Slide the mouthpiece onto the body's neck, turning from
side to side. After attaching the mouthpiece, set the reed
and ligature onto the mouthpiece.
NOTICE
• The reed tip is delicate so please take care not to dam-
age it with the ligature, etc.
Mouthpiece
Ligature
1
Slide the ligature onto the mouthpiece from its
tapered end.
2
Position the reed so that the edge of the mouth-
piece is slightly visible over the reed tip. Tighten
the two screws on the ligature to secure the reed
in place.
* Position the ligature so that the tuning fork logo is cen-
tered in the ligature's open space.
Reed
Ligature
screws
NOTICE
• Use the dedicated mouthpiece set (mouthpiece, reed,
ligature) included with this instrument. Failure to do so
can result in sound not being produced properly or other
malfunctions.
• Tighten the ligature screws just enough to keep the reed
from moving. Take care not to over-tighten.
• Do not wash this instrument or the instrument interior
with water. Doing so can result in damage to the instru-
ment.
• Do not apply grease to the instrument neck. Doing so
can result in damage to the neck.
• When the connection between the neck and the mouth-
piece is getting looser, replace the O-ring with the
included replacement one.
• If over the course of use the tip of the reed is broken off
or the reed becomes disfigured, replace it with the
included replacement reed.

Troubleshooting

• Sound does not stop.
- Try turning the power on again.
- Fluid remaining on the hole inside the mouthpiece
Reed

Specifications

Product name
Voices
Bluetooth
Ligature
Power supply
Power
Yamaha logo
consumption
Auto Power
Off
Size (W x D x H) 699 mm (W) × 110 mm (D) × 103 mm (H)
Weight
* The contents of this manual apply to the latest specifica-
joint may result in the sound not stopping. Remove
fluid from the hole by using a slim cotton swab.
Digital Saxophone
AWM Sampling
Bluetooth version: 4.2
Supported profile: A2DP
Complies with Bluetooth Low Energy
MIDI Specification
Wireless output: Bluetooth Class 2
Maximum communication distance:
About 10 m
Radio frequency (Operation frequency):
2,402 to 2,480 MHz
Maximum output power (EIRP): 4 dBm
Type of modulation: FHSS
USB AC adaptor: 5 V / 1 A
Self-powered USB hub: 5 V / 1 A
Four "AA" size alkaline (LR6), manga-
nese (R6) or
Ni-MH rechargeable (HR6) batteries
4.5 W (when using a USB AC adaptor)
Yes
1.0 kg (not including batteries)
tions as of the publishing date. To obtain the latest man-
ual, access the Yamaha website then download the
manual file.
Since specifications, equipment or separately sold
accessories may not be the same in every locale, please
check with your Yamaha dealer.
YDS-150 Owner's Manual
15