Yamaha YDS-150 Benutzerhandbuch Seite 28

2
While holding the [Fn] button, press the C key.
This puts the instrument in pairing standby. Keep hold-
ing the [Fn] button.
• LED screen: [B--] Pairing standby
• LED screen: [---] Bluetooth function off
3
While holding the [Fn] button, press the VOICE
[ ] button to begin pairing.
The LED screen will change to the following display
and the Bluetooth lamp (
NOTE
• To cancel the pairing, press the VOICE [
4
Select the connection on the smart device.
Select [YDS-150 Audio] if handling audio.
5
When pairing is complete, the Bluetooth lamp
will switch from quickly flashing to staying on.
If pairing fails, the Bluetooth lamp flashes slowly and
the LED display changes to [B--].
6
If five minutes elapse since starting pairing in
Step 3, pairing fails.
7
Release the [Fn] button.
Operation returns to the Voice selection screen.
NOTE
• While paired, the Bluetooth lamp stays lit up.
• Depending on your smart device, audio can play at a
high or uncomfortable volume level. Adjust the volume
of your smart device before playing audio.
Using the Dedicated App
You can use the dedicated app for this instrument to per-
form settings for the functions of this instrument more con-
veniently.
1
Install the dedicated app for this instrument on
your smart device.
2
Connect this instrument and your smart device via
Bluetooth.
You can perform the following settings for this instrument
on the app. For details, refer to the manual for the app.
• Editing user Voices / editing fingering information /
enabling and disabling Voice selection shortcuts, etc.
14
YDS-150 Owner's Manual
) will flash rapidly.
] button.
Instrument Maintenance after Playing
Before storing this instrument in its case, remove the
mouthpiece from this instrument and wipe off any moisture
near the bell and mouthpiece.
1
Loosen the ligature screws and remove the reed
and ligature from the mouthpiece.
Reed
2
Hold the mouthpiece firmly and turn it from side
to side to slide it off from the neck.
NOTICE
• When removing the mouthpiece, avoid applying a bend-
ing force to the neck base. Excessive force applied to
the neck can damage it.
3
Use a cleaning swab (sold separately) to clean
the inside of the mouthpiece.
* Be careful not to damage the tip of the mouthpiece.
* Always keep the cleaning swab clean and dry.
4
Wipe the bell and keys with a dry, soft cloth.
Ligature screws