Ec-Declaration Of Conformity - GF CONTAIN-IT Plus Bedienungsanleitung

EC-Declaration of conformity

12 EC-Declaration of conformity
EC Directive 97/23 EC
The manufacturer, Georg Fischer Piping Systems Ltd, 8201 Schaffhausen
(Switzerland), declares, in accordance with the harmonized EN ISO 16135 standard,
that the ball valves type 546
1. are pressure-bearing components in the sense of the EC Directive 97/23 EC
concerning pressure equipment and that they meet the requirements
pertaining to valves as stated in this directive.
2. Correspond to the respective requirements for valves pursuant to Directive
89/106/EC concerning building products.
The CE emblem on the valve refers to this accordance (as per the directive on
pressure equipment, only valves larger than DN 25 may be marked with EC).
Operation of these ball valves is prohibited until conformity of the entire system into
which the ball valves have been installed is established according to one of the
above mentioned EC directives. Modifications on the ball valve which have an effect
on the given technical specifications and the intended use render this
manufacturer's declaration null and void. Additional information is contained in the
"Georg Fischer Planning Fundamentals".
Name: Antonio De Agostini
Position: R&D Manager
Georg Fischer Piping Systems
Date: 2013-12-20
Instruction Manual
49