Specifications - Makita 6260D Betriebsanleitung

ENGLISH
(Original instructions)
1 Button
2 Battery cartridge
3 Switch trigger
4 Reversing switch lever
5 Low speed

SPECIFICATIONS

Model
Capacities
Steel ..............................................10 mm
Wood .............................................21 mm
Wood screw ...................................5.1 mm x 38 mm
Machine screw...............................6 mm
-1
No load speed (min )
High ...............................................0 – 1,200
Low ................................................0 – 350
Overall length ...................................192 mm
Net weight.........................................1.4 kg
Rated voltage ...................................D.C. 9.6 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
6 High speed
7 Speed change lever
8 Graduations
9 Adjusting ring
10 Drill marking
6260D 6270D
10 mm
25 mm
5.1 mm x 63 mm
6 mm
0 – 1,200
0 – 350
192 mm
1.5 kg
D.C. 12 V
GEA010-1
11 Pointer
12 Sleeve
13 Ring
14 Tighten
6280D
10 mm
25 mm
5.1 mm x 63 mm
6 mm
0 – 1,200
0 – 350
192 mm
1.6 kg
D.C. 14.4 V
CORDLESS DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
6390D
13 mm
36 mm
6 mm x 75 mm
6 mm
0 – 1,200
0 – 350
220 mm
2.1 kg
D.C. 18 V
GEB051-2
MISUSE or
3