Specifications - Makita GA4030R Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Sound power level (L ) : 96 dB (A)
WA
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model GA4030R
Work mode: surface grinding
Vibration emission (a
h, AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h, DS
Uncertainty (K) : 1.5 m/s
Model GA4530R
Work mode: surface grinding
Vibration emission (a
h, AG
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h, DS
Uncertainty (K) : 1.5 m/s
) : 85 dB(A)
pA
2
) : 7.0 m/s
2
2
) : 2.5 m/s or less
2
2
) : 7.5 m/s
2
2
) : 2.5 m/s or less
2
GA4030R
100mm (4")
6.4mm
M10
1.7kg
Model GA5030R
Work mode: surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
WARNING:
The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Angle Grinder
Model No./ Type: GA4030R, GA4530R, GA5030R
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
5 ENGLISH
GA4530R GA5030R
115mm (4-1/2") 125mm (5")
7.2mm
M14 or 5/8" (country specific)
-1
11,000min
266mm
1.8kg
/II
2
) : 8.5 m/s
h, AG
2
2
) : 2.5 m/s or less
h, DS
2