JVC DLA-G150CLE Bedienungsanleitung Seite 50

Menu Operations
Set up for Watching Image Software (Video Menu Mode Only)
This unit has a function which allows you to project movies, which were recorded on film, in the best possible conditions.
(Function to convert 2-3 pull-down interlace scans to progressive scans)
Normally use set to AUTO.
1
Press the MENU button.
The main menu appears on the screen.
2 Select "Set up" with the cursor button 5 or ∞, and press 3 or the ENTER button.
The "Set up 1" submenu appears on the screen.
3
Select "Set up 2" with the cursor button 5 or ∞, and press 3 or the ENTER button.
The "Set up 2" submenu appears on the screen.
4 Select "Deinterlace" with the cursor button 5 or ∞.
5
Select the Deinterlace function mode with the cursor button 2 or 3.
Video: When watching images recorded with a video camera
Film: When watching images recorded on film
AUTO: The setting is changed automatically
6
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
Note
• Operates when the signal is an NTSC or PAL interlace signal. Does not operate for other signals. (The menu is not
displayed when other signals are inputted.)
48