Adjusting The Cutting Height - Toro Super Bagger 20838 Bedienungsanleitung

1. Handle lock
Adjusting the Cutting
Height
Adjust the cutting height as desired.
Note:
To raise the machine, move both cutting-height
levers forward; to lower the machine, move them
rearward (Figure 15).
1. Cutting-height lever
Note:
The approximate cutting height settings are A=
25 mm (1 inch); B= 38 mm (1-1/2 inch); C=51 mm (2
inches); D=64 mm (2-1/2 inches); E=83 mm (3-1/4
Figure 14
2. Handle positions
Figure 15
inches); F=95 mm (3-3/4 inches); and G=108 mm
(4-1/4 inches).
g007284
g012130
10