Resetting The Appliance To Factory Settings (Reset); Care And Cleaning; Regular Cleaning - Electrolux ECG6600 Gebrauchsanweisung

822_949_354 ECG6600-East_Elux.book Seite 131 Freitag, 1. Februar 2008 11:36 23
0 To go back to the coffee mode, press
the "MENU" button (Figure 5) twice or
wait about 120 seconds until the
appliance automatically jumps back to
coffee mode.
13.9 Resetting the appliance to
factory settings (Reset)
This function resets previously changed
values to the factory settings.
The following settings or saved data
are affected:
• Water hardness
• Cup filling quantities
• Coffee temperature
• Switch-off time
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«RESET TO DEFAULT» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «RESET TO DEFAULT NO».
0 Press the scrolling button "<" (Figure 6)
until «RESET TO DEFAULT YES»
appears on the display.
0 Confirm the menu option with the
"OK" button (Figure 6). The appliance is
now reset to the factory settings.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
being reset to the factory settings.
3 After programming, the appliance
automatically jumps back to coffee
mode.
14

Care and cleaning

Keep your appliance clean at all times
to ensure that it works without
problems and the coffee quality
remains consistent.

14.1 Regular cleaning

1 Warning! Switch the appliance off
before cleaning. Allow the appliance to
cool off.
Warning! Never put the appliance or
1
individual parts of the appliance into
the dishwasher. Never immerse the
coffee machine in water.
1 Warning! Never put water into the
bean container as this will damage the
mill mechanism.
1 Do not use any abrasive or caustic pro-
ducts. Only wipe off the inside and
outside of the housing with a damp
cloth.
0 Remove the water tank (Figure 7) every
day and throw the remaining water
away. Rinse the water tank with clean
water. Use clean water every day.
0 Empty the waste coffee container
every day or at least when the display
asks you to do this, see „Emptying the
waste coffee container" page 132.
0 Empty the drip tray on a regular basis.
At the latest, however, when the red
float on the drip tray (Figure 33) shows
through the opening on the drip tray
grill.
0 Clean on a regular basis,at least once a
week, the water tank (L), drip tray (M),
drip tray grill (A) and waste coffee con-
tainer (P) with warm water, mild deter-
gent and possibly asmall brush.
0 After every frothing process rinse off
the nozzles on the milk container to
clean off remains of milk, see „Cleaning
the nozzles" page 125.
0 Clean the milk container on a regular
basis, see „Cleaning the milk container"
page 132.
0 Check that the holes on the coffee dis-
penser are not blocked. You can clean
off dried on coffee using a needle (Fig-
ure 34).
g
131