Remote Control; Preparing The Remote Control; Replacing The Battery; Installing Your Music Desk Stand - Sony MDS-70 Bedienungsanleitung

Remote control

The remote control provides an easy and convenient way for
you to use your music desk stand.
Note If you do not plan to use the remote control over a long
period of time, remove the battery. This is done to avoid possible
damage from battery leakage and corrosion.

Preparing the remote control

Pull out the insulating plastic sheet to allow power to flow from
the battery.
Note The remote control already contains a battery.

Replacing the battery

If the remote control can no longer operate the music desk stand,
replace the battery with a new one.
8 Getting to know your MDS-70
This is the Internet version of the user's guide. © Print only for private use.
To replace the battery
a. b.
1. Turn the remote control upside down.
2. Slide out and remove the battery case, as shown in
illustration a.
3. Remove the old lithium battery.
4. Insert a new lithium battery with the + side facing up.
5. Slide the battery case back into place.
Installing your music desk
stand
You can place your music desk stand wherever you want it and
how you want it. The illustration below is just an example.
Note Do not use the AC power adapter with subwoofer with any
other device. Do not connect any other AC power adapter to the
main unit.
CR2025 lithium battery