Climadiff PCLP Serie Gebrauchsanweisung Seite 44

never be built-under or built-in. For proper operation of the
appliance, it is imperative to allow good air circulation around
the unit. We do not accept any liability instance of non-
compliance with the installation instructions.
 Avoid locating the unit in moist areas.
 Keep the appliance away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may
also cause the appliances not to perform properly.
 Plug the wine cooler into an exclusive, properly installed-
grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized
products service center.
 To
ensure
recommendations given in the present manual.
 Unpack the appliance and visually check that it is not
damaged. Do not connect a damaged appliance. Inform your
retailer or point of sale of any damage. In such a case, keep
the packaging.
 It is recommended that the appliance be allowed to settle for
at least 24 hours before connecting the electrical power
supply, so that the compressor fluid feed is correct.
 Proper air circulation is necessary to avoid overheating. To
ensure sufficient
recommendations provided.
 In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
proper electrical
ventilation,
condenser).
connection,
observe the
Observe the
follow the
installation
installation
44