Privacy Zone Setting [Privacy Zone] - Panasonic WV-CL930 Handbuch

12. Privacy zone setting [PRIVACY ZONE]

When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-
vacy zone) are hidden.
ON (1):
ON (2):
OFF (default):
Up to 8 portions can be specified for the privacy zone. Follow the procedure below for privacy
zone setting.
Note:
The privacy zone function is disabled at initializing the unit, i.e. right after turning on the
power.
"CAMERA SETUP" screen
**CAMERA SETUP** 2/2
PRIVACY ZONE OFF
MIRROR
LENS-DRIVE
STABILIZER
RET TOP
Step 1
Move the cursor to "PRIVACY ZONE", select
"ON (1)" or "ON (2)", and press the setting
button.
→ The zone number selection screen
appears.
Step 2
Use the right or left button to select the target
zone number after ascertaining that the cur-
sor is present on "1" of "1/8" located at the
right side of "ZONE NUMBER". When a zone
number is marked with "*" at its right side, the
zone with the number is already set to the
privacy zone.
42
Downloaded from www.Manualslib.com
Grays the zone.
Mosaics the zone.
Displays the zone normally.
Zone number selection screen
**ZONE NUMBER 1 /8**
OFF
DC
OFF
RET TOP END
END
manuals search engine
Zone setting screen
**ZONE NUMBER 1 /8**
POSITION
SCALE
SET DEL
RET TOP END
Step 3
Press the setting button after zone number
selection.
→ The zone setting screen appears.
Notes:
• When a zone number that is already set
to the privacy zone in Step 2 is selected,
the image of the zone is displayed in the
zone frame on the zone setting screen.
Performing Step 4 and Step 5 clears the
setting zone and implements new zone
setting.
• To cancel the zone setting, move the cur-
sor to "DEL" and press the setting button.
The zone setting is canceled.
PUSH SW
PUSH SW