Gain Control Setting [Agc] - Panasonic WV-CL930 Handbuch

4. Gain control setting [AGC]

"CAMERA SETUP" screen
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
DNR
RESOLUTION
BW MODE
LEVEL
RET TOP END
Downloaded from www.Manualslib.com
**CAMERA SETUP** 1/2
OFF
ALC
OFF
ON
OFF
INT
ATW1
OFF
HIGH
HIGH
"AGC MAX" screen
** AGC MAX **
...|...128
- +
manuals search engine
Step 1
Move the cursor to "AGC" and use right or left
button to select "ON" or "OFF".
ON (default): Automatically increases the
gain to make the screen brighter when
the illuminance of the photographic sub-
ject becomes darker. The maximum
value is adjustable.
OFF: Does not increase the gain. (The nor-
mal image remains.)
Step 2
Move the cursor to "ON" and press the set-
ting button to call up the "AGC MAX" screen.
Step 3
Move the cursor to "LEVEL". The cursor is
reversely highlighted.
Move the cursor horizontally to adjust the
gain with use of the right or left button.
Step 4
To return to the setting screen or the normal
video screen, move the cursor to "RET" or
"END" respectively and press the setting but-
ton.
Notes:
• Change in the level of "AGC MAX" caus-
es change in the level of the input signal
that enables electronic
enhancement when "SENS UP" is set to
AUTO and also change in the level of the
input signal that activates black-and-
white mode.
• If noise is undesirable, adjust the level of
"AGC MAX".
sensitivity
29