Panasonic WV-CL930 Handbuch Seite 13

r Put the cover on the ALC connector so
that the lens cable is secured to the rib.
c
Secure the camera mounting base
(option) to an installation position,
and mount the camera on the base.
• The mounting method of the camera
mounting base varies depending on the
material of the installation position.
Do not use wood screws or nails to
secure the camera mounting base.
• Steel products:
Secured with bolts and nuts
• Concrete wall:
Secured with anchor bolts or AY plug
bolts (M6 or M8) manufactured by
Matsushita
(Recommended
(M6): 5.0 N·m, recommended tight-
ening torque (M8): 6.2 N·m
• The mounting conditions of the camera
mounting base are described as follows:
Important:
• If the total weight of the camera and lens
exceeds 1 kg, use a housing to take
measures against camera drop.
Downloaded from www.Manualslib.com
Electric Works,
tightening
manuals search engine
Cover
Screw
(locally procured)
Ltd.
torque
Lens cable
ALC connector
Camera mounting
base (option)
Screw
(locally procured)
13