Step 1 Preparing; Checking The Supplied Accessories; Installing Batteries - Sony VPL-PHZ12 Kurzreferenz

Step 1

Checking the Supplied Accessories

RM-PJ8 Remote Commander (1)
Lithium battery (CR2025) (1)
The battery is already installed. Before using
the remote commander, remove the
insulation film.
AC power cord (1)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)
Using the CD-ROM manuals
The manuals can be viewed on a computer with
Adobe Reader installed.
You can download Adobe Reader for free from the
Adobe website.
1
Open the "index.html" file on the CD-ROM.
2
Select the language of the manual you want
to view.
Note
If you damage or lose the CD-ROM, you can purchase a
new one from your dealer or Sony service representative.
38
GB
Preparing
Preparing

Installing batteries

CAUTION
One lithium battery (CR2025) is supplied for the
RM-PJ8 Remote Commander. To avoid risk of
explosion, use a lithium battery (CR2025).
1
Pull out the lithium battery compartment.
Pull the battery compartment toward you
while releasing the lock.
2
Insert a lithium battery.
The lithium battery should be placed in the
compartment with the plus side facing up.
3
Close the lithium battery compartment.