Fronius MHP 280i G PM Bedienungsanleitung Seite 47

Start-up
MTG d, MTW d -
1
Fitting wearing
parts to the torch
body
3
Note regarding
NOTE!
the inner liner
with gas-cooled If a plastic inner liner is used in the torch body of a gas-cooled welding torch,
reduce the power figure shown in the technical data by 30%.
welding torches
▶
To operate gas-cooled welding torches at maximum power, use a steel inner liner in
the torch body.
2
** Screw on and tighten the gas
nozzle as far as it will go
47