Fronius MHP 280i G PM Bedienungsanleitung Seite 45

Do not dispose of used devices with domestic waste. Dispose of them according to the
safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
-
-
-
Do not reach into the rotating feed rollers of the wire drive or into rotating drive compon-
ents.
The cover of the welding torch may only be opened while maintenance or repair work is
being carried out.
During operation
-
-
Safety
Incorrect operation or poorly executed work can cause serious injury or damage.
▶
▶
▶
An electric shock can be fatal.
There is also a risk of injury from the emerging wire electrode.
Before commencing any of the work described in these Operating Instructions:
▶
▶
▶
Cogs
Feed rollers
Wirespools and wire electrodes
Ensure that the cover is closed.
Keep the cover closed.
WARNING!
All activities described in these Operating Instructions may only be carried out by
trained and qualified personnel.
All functions described in these Operating Instructions may only be used by trained
and qualified personnel.
Do not carry out any of the work or use any of the functions described until you have
fully read and understood the following documents:
these Operating Instructions,
the enclosed "Safety rules" document,
all the Operating Instructions for the system components, especially the safety rules.
WARNING!
Turn the power source mains switch to the "O" position
Disconnect the power source from the mains
Ensure that the power source remains disconnected from the mains until all work
has been completed
45