Qlima ECO 1700 Installationsanleitung Seite 46

4
46
Instal_man_ECO1700('20)V6.indd 46 Instal_man_ECO1700('20)V6.indd 46
call an electrician to request installation.
• Check the electric power supply. This de-
vice must only be connected to an earthed
socket - voltage 230 V / ~ 50 Hz.
The device MUST always be connected
to a grounded socket. It is forbidden
to connect the device to an unearthed
socket.
• The plug must be easily accessible once the
device has been connected.
• Do not place the appliance directly under
a wall mounted socket.
Before connecting the device, make sure that:
• The required voltage is complied with.
• The socket and current meet requirements.
• The plug fits the socket.
The electrical connections have been
G
adequately checked by an expert,
especially if you are not sure everything
is in order.
• Never cover the air inlet.
• Do not insert any objects into the holes in-
side the stove.
• Avoid all contact with water. Do not spray
the stove or immerse it in water, as this
could cause a short circuit.
• Remember to unplug the stove before
cleaning or replacing parts on it.
• Always disconnect the plug from the sock-
et before carrying out any maintenance
work on the stove.
• Disconnect the plug from the socket when
the heater is not in use.
30-07-20 16:54 30-07-20 16:54