Dell PowerVault MD3600f Handbuch Zum Einstieg Mit Dem System Seite 15

3 MD3600f series storage array
4 Host server(s)
Installing the Bezel
Install the bezel (optional).
Installing HBAs and Drivers
1 Physically install the HBAs.
2 Connect the cables.
3 Install the HBA drivers and the operating system HBA patches/hotfixes.
4 Ensure that the recommended HBA settings are applied.
Downloaded from www.Manualslib.com
NOTE:
Before turning on the host server(s), ensure that the storage array
status LED is blue.
NOTE:
Ensure that you read the Configuring Fibre Channel With the Dell MD3600f
Series Storage Array document before continuing with this procedure. For detailed
instructions about installing the MD storage software, setting up the enclosure, and
the post-installation tasks, see the Deployment Guide.
manuals search engine
Getting Started With Your System
13