Safety Information - Conrad 44 92 38 Bedienungsanleitung

5. Safety Information

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with these
operating instructions. We do not assume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal injury caused by improper use
or failure to observe the safety information. The warranty/guarantee will expire in such cases!
Dear customer, the following safety information is intended not only for the protection of your health but also for the
protection of the device. Please read the following items carefully:
• The unauthorized conversion and/or modification of the product is prohibited for safety and approval
reasons (CE). Never open/dismantle this product! There are no interior components to be set or serviced
by you.
• This product is not a toy and not suitable for children. Operate it out of the reach of children.
• Mains adapter setup corresponds to protective class I. Only a proper protective contact mains socket
must be used as voltage source.
The mains socket must be close to the device and easily accessible.
• The product is only designed for use in dry, enclosed inner rooms; it must not become damp or wet. Never
touch it with your bare hands! There is danger to life from electric shock!
• Protect the product from direct solar radiation, strong heat or cold, dust and dirt, vibrations or mechanic
load. Handle the product with care; impacts, shock or fall even from low heights will damage it.
• If the product is brought from a cold into a warm room (e.g. for transport), it is possible that condensation
develops.
Therefore, first let the product reach room temperature before connecting it to the power supply. This may
take several hours. There is danger to life from electric shock from the mains unit otherwise!
• Do not pull the mains plug from the mains socket by pulling the cable.
• If the mains adapter or mains cable are damaged, do not touch it. Danger to life from electric shock!
First deactivate all sides of the mains socket to which the mains adapter is connected (e.g. switch off the
respective fuse or turn out the fuse. Then deactivate the associated FI protection switch). Only then pull
the mains plug from the mains socket and take the product to a specialist workshop.
• It can be assumed that safe operation is no longer possible if:
- the device shows any visible damage,
- the device no longer works
- the device was stored under unfavourable conditions for an extended period of time
- if it was subjected to heavy stress during transport
• Disconnect the product from the power supply if not used for an extended period (e.g. during storage).
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insurance
Association for Electrical Systems and Operating Materials are to be observed.
• In schools, training centres, hobby and self-help workshops, the use of the product must be supervised
by responsible trained personnel.
• If there are any questions that are not answered in this operating manual, contact our technical support or
another expert.
25