Intended Use; Explanation Of Symbols - Conrad 44 92 38 Bedienungsanleitung

3. Intended Use

The monitor is used specifically for monitoring purposes, e.g. in connection with external cameras, digital recorders
(DVR) or other devices.
The monitor has several inputs for analogue video signals for this (2x cinch, 1x VGA) as well as a digital input
(1x HDMI). The monitor also has an audio input (3.5 mm jack socket).
The video signal at the video input and the audio signal are passed through and available, e.g. for recording on an
external recorder.
Operation is performed via buttons at the monitor or an included IR remote control. An external mains adapter is used
for power supply.
The monitor can be set up via a standing base. Alternatively, the monitor can be fastened via the assembly holes at the
back, e.g. to a wall holder (not enclosed).
Read these operating instructions completely and attentively; they contain a lot of important information on setup,
function and operation. Always observe the safety information!
Any use other than that described above can damage the product and may involve additional risks such as short
circuit, fire, electric shock, etc. No part of this product must be modified or converted!
This product complies with the statutory national and European requirements. All company names and product names
are trademarks of their respective owners. All rights reserved.
HDMI is a registered brand of HDMI Licensing L.L.C.

4. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric shock.
An exclamation mark in a triangle indicates important notes in these operating instructions that must be
strictly observed.

The „hand" symbol indicates special information and advice on operation.
24