Montage - SoFlow SO2 Originalbetriebsanleitung

3.2 Montage

The handlebar of your SO2 is connected to the scooter via the brake cable. Before you can get started with your SO2, you
should attach the handlebar as follows:
1. Raise the steering column slowly until it is in line with the front fork.
2. Connect the brake cable as shown in the pictures on the right.
3. Insert the handlebar into the steering column
4. Fasten the screws using the provided Allen key and the four flat head screws
5. Make sure the handlebar is fixed the right way.
Now you can turn on your SO2 by pressing the power button
.
12
Front view
Side view