Makita DUR190U Betriebsanleitung Seite 11

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Type of handle
No load speed
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
3-tooth blade
(P/N 191J34-5)
4-tooth blade
(P/N 729025-2)
Nylon cutting head
(P/N 126674-0)
Plastic blade
(P/N 126642-3)
DUR190U DUR190L
Bike handle Loop handle
3.1 - 3.4 kg 2.9 - 3.2 kg
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
11 ENGLISH
DUR191U
Bike handle Loop handle
-1
3: 6,000 min
-1
2: 5,100 min
-1
1: 3,500 min
1,775 mm
2.0 - 2.4 mm
230 mm
230 mm
300 mm
230 mm
D.C. 18 V
3.4 - 3.7 kg 3.2 - 3.5 kg
DC18SH
PDC01
DUR191L