Connecting Cables - Eizo Radiforce Rx840 Installationshandbuch

AC adapter (PSA-064)
1 2 3
1. Power cord holder
attachment hole
2. Power connector
3. Main power switch
4. Power cable

Connecting Cables

Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and vertical scan
frequency to those that are available for this monitor. Refer to the compatible resolution table (back of cover page) before
connecting the PC.
Note
• When connecting multiple PCs to this product, refer to the User's Manual (on the CD-ROM).
1.
Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
6
4
Used to attach the power cord holder.
Connects the power cord.
Turns the main power on or off.
Connects with the power connector on the monitor.
Digital connection
(DisplayPort)
Signal cable: DisplayPort - DisplayPort
Digital connection
(DVI)
Signal cable: DVI-D - DVI-D(Dual Link)
(supplied)
or
(supplied)