Eizo RadiForce RX840 Installationshandbuch Seite 11

Showing Button Guide
Press the front buttons (except
Note
• The button guide will continue to appear while the Adjustment menu or Mode menu is showing.
• The button guide is displayed differently depending on the selected menu or status.
Selecting Display Mode
This function allows easy selection of a desired mode according to monitor application.
Mode
1-DICOM
2-Custom
3-CAL1/4-CAL2/5-CAL3 Displays the screen adjusted by calibration software.
6-Hybrid-γ
7-sRGB
8-Text
Procedure
1. Press .
The mode menu appears at the bottom left of the right screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
→ 1-DICOM←→2-Custom←→3-CAL1←→4-CAL2←→5-CAL3←→6-Hybrid-γ←→ 7-sRGB←→ 8-Text ←
Controlling Monitor Quality
The quality control software "RadiCS LE" (for Windows) is included with this monitor.
To calibrate the monitor and manage the calibration history, install RadiCS LE with reference to the RadiCS LE User's
Manual (on the CD-ROM). Use the RadiCS SelfQC function and built-in Integrated Front Sensor to perform periodic
calibration and Grayscale Check for the monitor independently. For details, refer to the User's Manual (on the CD-
ROM).
Attention
• Connect the monitor to the PC with a USB cable when using RadiCS LE.
Note
• To perform advanced quality control that conforms to medical standards, use the optional monitor quality control software
kit "RadiCS UX1".
button), the button guide appears above the button.
Available to display in DICOM mode.
Select this to define a desired set of parameter settings.
Automatically identifies the display area for the monochrome and color images on the
same screen, and displays each set status.
Suitable for color matching with sRGB compatible peripherals.
Suitable for displaying texts for word processing or spreadsheets.
The mode menu
appears.
or while the mode menu is displayed.
Purpose
is pressed.
9