Operation; Raclette - Silvercrest SRGS 1300 C3 Bedienungsanleitung

Operation

WARNING! RISK OF BURNS!
► The surfaces of the appliance become very hot during use. Touch only the
temperature control and the handles at the sides.

Raclette

1) Select the side of griddle 1 that you want to use.
2) Lightly oil the upper surface of the stone griddle 5 and the griddle 1 with
the side you want to use at the top as well as the inside of the pans 6.
3) Insert the plug into a mains power socket. The power indicator lamp 4 lights
up red to show that the appliance is connected to the mains.
4) Turn the temperature control 2 to MAX. The heat-up indicator lamp 3 lights
up green to show that the appliance is heating up.
NOTE
The heat-up indicator lamp 3 may come on and go out several times
►
during this process. This is not an appliance malfunction! It merely
indicates that the appliance is maintaining the set temperature.
► Depending on the room temperature, heating up will start at different
positions on the temperature control 2.
If you only want to use the raclette, allow the appliance to heat up for
10 minutes. If you want to use the stone griddle 5 at the same time to grill
food, wait around 30 minutes until the stone griddle 5 has heated up (see
Chapter "Grill").
The pans 6 do not need to be pushed into the appliance while it is heating up.
5) Fill the pans 6 with the desired ingredients. Ensure that the pans 6 are not
overfilled otherwise the food could get too close to the heating elements and
could even touch them!
6) Place the pans 6 into the device. The slight recess in the appliance helps to
keep the pans in place.
7) Turn the temperature control 2 towards 0 if you want to reduce the
temperature. Turn the temperature control 2 towards MAX if you want to
increase the temperature again.
8) Remove the pans 6 from the device as soon as the contents are cooked.
SRGS 1300 C3
GB │ IE │
21 ■