Connecting An Iphone/Android - JVC KW-M565DBT Kurzanleitung

Connection/Installation
Ñ
ISO Connector function guide
Pin Color and function
A-4 Yellow
A-5 Blue
A-6 Orange/White
A-7 Red
A-8 Black
B-1/ B-2 Purple (+) /
Purple/Black (–)
B-3/ B-4 Gray (+) /
Gray/Black (–)
B-5/ B-6 White (+) /
White/Black (–)
B-7/ B-8 Green (+) /
Green/Black (–)
Max. 150 mA, 12V
[1]
• Speaker Impedance: 4-8 Ω
!
CAUTION
Before you connect the commercially
available ISO connectors to the unit, check the
following condition:
• Make sure that the pin assignment of the
connector matches with the JVC unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire,
use a commercially available interface.
28
Battery
Power Antenna
[1]
Illumination
Ignition (ACC)
Earth (Ground)
Connection
Rear Right
Front Right
Front Left
Rear Left
Ñ

Connecting an iPhone/Android

USB cable [2]
KS-U62 (0.8m) [3]
USB terminal
Cap
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately
[3] Optional accessory
Android smartphone
[2]
iPhone [2]
Lightning connector
(1.0 m)
[1]
5V = 1.5A