Inhaltsverzeichnis
Werbung
中文
EN
DE
RU
KO
PT
JA
ES
98021/98022/98023/98024
4-ST4.2x19
V、Installation:
Open the package and inspect whether the wire reel is damaged.
The wire reel must be installed in a work environment that meets the installation requirements.
Make sure the wire reel is properly installed according to the installation diagram below. Rivets or screws must be mounted in the
mounting holes of the bracket.
.
Ceilmg
Wall
Once the wire reel is installed, you can unscrew the screws on the stopper and move the stopper to the length of the wire that needs
to be exposed outside the equipment.
Opening the black cover at the side of the air inlet pipe, you can see the wire locking device as shown in the figure below. In the factory,
the ratchet tension spring is tightened to the "ON" position for locking the wire of any length as needed; and the ratchet tension spring is
tightened to the "OFF" position, so that the wire can move freely.
9
Werbung
Inhaltsverzeichnis
