Stihl Laser 2-in-1 Gebrauchsanleitung Seite 16

G
Fitting the Holder
Attach the model-specific holder to the side of the handlebar and turn
:
it through about 90°.
Slide the holder downwards until the latch (a) snaps into place. If
:
necessary, clean the clamping and locking points - it must engage
audibly and be firmly seated without any play.
Fit the Laser 2-in-1 in position and push it down until it engages - to
:
remove, press the lever (b) against the handlebar and pull the
Laser 2-in-1 off vertically.
16
a
b