Installation Of The Room Thermostat With Actuator; Operation - oventrop Unibox T-RTL vario Betriebsanleitung

Unibox T-RTL vario
(2)
Remote control
4. Fit the cover to the "Unibox T-RTL vario".
The cover is not included in the
extent of supply and has to be
ordered separately (see 4 on page
29).
7.5 Installation of the room
thermostat with actuator
1. After having completed all building work,
remove the protection cover of the "Unibox
T RTL vario".
2. Remove the protection cap.
3. Screw the actuator (see Illust. 10 on page
33 (2)) onto the valve. Feed the cable
through the hole in the wall box unit (see
6.1 on page 30).
For further information please refer
to the operating instructions sup-
plied with the actuator.
1
Illust. 10: Installation of the room thermostat
with actuator
(1) Actuator
(2) Room thermostat
4. Install the room thermostat according to
the operating instructions supplied with the
102273480-V03.06.2020
product.
5. Fit the cover to the "Unibox T-RTL vario".
8.

Operation

Set the fluid temperature of the surface tem-
perature regulation circuit at the handwheel
inside the "Unibox T-RTL vario" (see 3.4.1 on
page 28). Set the room temperature at the
thermostat.
2
The cover is not included in the
extent of supply and has to be
ordered separately (see 4 on page
29).
Operation
33