Specifications - Makita BUB360 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. HIGH/LOW button
2-2. "OFF" button

SPECIFICATIONS

Capacities
No load speed (min
Overall length
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
･
･
･
･
･
･
･
Cd
Ni-MH
Li-ion
Downloaded from www.Manualslib.com
Explanation of general view
3-1. Hook
3-2. Button
3-3. Long nozzle
4-1. Button
5-1. Hanger
Model
Air volume (HIGH)
Air volume (LOW)
HIGH
-1
)
LOW
(without long nozzle)
(with long nozzle)
Net weight
Rated voltage
Take particular care and attention.
Read instruction manual.
Keep a hand away from rotating parts.
Danger; be aware of thrown objects.
Keep bystanders away.
Wear eye and ear protection.
Do not expose to moisture.
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
manuals search engine
END012-1
Intended use
The tool is intended for blowing dust.
Noise
The typical A-weighted noise level determined according
to EN15503:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN15503:
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
3
8-1. Limit mark
9-1. Screwdriver
9-2. Brush holder cap
BUB360
3
4.4 m /min.
3
2.6 m /min.
17,000
10,000
424 mm
921 mm
3.1 kg
D.C. 36 V
) : 81.2 dB(A)
pA
) : 93.9 dB(A)
WA
Wear ear protection
2
) : 2.5 m/s or less
h
2
ENE018-1
ENG102-3
ENG900-1
ENG901-1