ENGLISH
(Original instructions)
1
Red indicator
Button
3
Battery cartridge
SPECIFICATIONS
Model
Air volume
No load speed (min
Overall length
Net weight
Rated voltage
Battery cartridge
•
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from
country to country.
•
Weight, with battery cartridge, according to EPTA-
Procedure 01/003
Intended use
The tool is intended for blowing debris.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Explanation of general view
Pointer
Air volume adjusting dial
Switch trigger
0 – . m
)
–1
8 mm
1. kg
BL11
ENE081-1
GEA00-
BUB13
/min.
3
0 – 18,000
89 mm
1.8 kg
D.C. 1. V
BL130
.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
11. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
1. Prevent
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
1. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
Garden nozzle
8
Blower outlet
BUB183
0 – . m
3
83 mm
1. kg
D.C. 18 V
BL181
unintentional
starting.
/min.
8 mm
1.9 kg
BL1830
Ensure
the
9