Tc Control Panel - elco ES08.5200 G/F-VT Betriebsanleitung

Commissioning
Description, functions

TC control panel

TC
Electric control cabinet on burner
The electric control cabinet contains all
the components needed to operate the
burner. The lockable access door has a
control panel TC viewer window,
indicators and an inside documentation
storage pocket.
There is a detachable plate with the
various cable glands in the lower part of
the cabinet.
This highly accessible cabinet can have
various options fitted:
- A built-in output regulator of a
standardised 48 x 48 or 48 x 96 mm
size.
- Data transmission relays to be placed
on a DIN 35 mm rail available under
the control panel (remove two screws
10 and swing open).
Downloaded from www.Manualslib.com
Connection box on burner
Option for separate control cabinet
B10
24
05/2009 - Art. Nr. 4200 1017 4400A
manuals search engine
Measuring bridge [µA DC]
ionisation current
Linking terminals between the
burner and the electrical
cabinet
Description of functions of the TC
(Control Panel)
A2 Option: 48 x 48 or 48 x 96 mm
standard positions for installing
an output regulator
B10 Measuring bridge [µA DC]
ionisation current
F10 TC fuse
Green lights
H4 Ignition flow rate
H4.1 Safety valve
H4.2 Main valve
H5 Minimum control flow rate
H5.1 Nominal flow rate
H10 TC on
H15 Transformer
P4 Total hours counter
P5 Nominal flow rate hour meter
Three position switch:
S1 TC main switch
0 Off
1 Local mode
1 Remote control mode
S2 Power control selector
Manual mode with S3
Auto Automatic mode
with S1
S3 By pulse with S2
+/- Power
increase/decrease
SA1 The control unit shows:
- the program,
- faults, red light lit and reset
pushbutton.
10 Two screws to be removed to
access the unit and the option
positions
11 Under the TC, remove two
screws 10 and swing open:
Access to DIN 35 mm rail and
terminals for options
21 Identification plate
23 Detachable plate for the cable
glands
en
15