Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise Seite 37

press the POWER button
on the display
2. Press the AC WIRE button
STUD button
Respective mode arrow
display
the right material.
3. First of all, the appliance must be
calibrated. Place it flat against the
wall where you wish to search for
concealed objects.
4. Press and hold the PUSH button
until the signal tone hums. The appli-
ance has now adjusted itself to the
wall thickness. Continue to keep the
PUSH button
fig. B).
5. Move slowly along the wall with the
appliance. As the detecting intensity
arrows
closer to the center of the display,
you are getting closer to the con-
cealed object. When the detecting
intensity arrows
a constant signal tone is heard, mark
this position (see Fig. E + G).
.
2
or METAL button
3a
will be correctly indicating
2
pressed down (see
14
in the display
23
23
to turn
12
or
3
on the
17
move
2
touch and
.
3b
14
GB 37