Measuring Volumes - Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise

the result will be shown in the lower
row
21
7. Repeat steps 2 to 6 to add further
measurements.
8. Press the MODE button
the addition mode. All the measure-
ments will be cleared from the display
.
2

Measuring volumes

1. Slide the function switch
position "MEAS / DETECT". The
display
display
press the POWER button
on the display
2. Press the MODE button
measuring mode indication symbol
for volume will appear on the
27
display
will flash on the display
3. Press the MEAS button
measure the length. The measured
length appears in the upper row
of the display
(width) will start flashing.
of the display
will be turned on. If the
2
is not turned on, briefly
2
.
2
and the letter "L" (length)
2
and the letter "W"
2
.
2
to leave
10
to the
9
to turn
12
twice. The
10
.
2
twice to
6
20
GB 31