Tips On Measurement - Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise

In cases of doubt, always ask a qualified
building contractor.
Attention!
Should the product find a live wire
carrying alternating current, ( ) high
voltage warning symbol
in the display
should you drill at this location! Danger
of electric shock!

Tips on measurement

- The PUSH button
pressed during the entire search process
(calibration and search) (see fig. B).
- If you calibrate too closely to the object
or directly on the object, the calibration
can fail. If the calibration fails, the LC
display shows the full intensity and a
long beeping tone sounds or can't search
any object in the wall. Move and hold
the device several centimeters further to
the right or left of the previous surface
and recalibrate. Start the search process.
- Repeat several times to ensure the
detection accuracy.
34 GB
19
. Under no circumstances
2
should be remain
14
will appear