Locating Concealed Objects - Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise

3. Press the MODE button
product is now ready for the second
measurement.
4. Measure the next volume as described
in the section "Measuring volumes".
5. Press the Memory button
The result of the first measurement
will be shown and blinking in the
lower row
6. Press the + / = button
measurements are added and the
result is shown in the lower row
of the display
7. Repeat steps 2 to 6 to add further
measurements.
8. Press the MODE button
the addition mode. All the measure-
ments will be cleared.
Locating concealed
objects
Hints: Before using the product for this
task, first test it by locating a metal pipe-
line or electrical power cable at a known
position.
of the display
21
.
2
. The
10
again.
4
.
2
again. Both
7
21
to leave
10
GB 33