Herunterladen Inhalt Inhalt Diese Seite drucken

Features Of The Device (Pic. 1); Instructions For Use - eta Fenite Bedienungsanleitung

Lockenstab
Vorschau ausblenden Andere Handbücher für Fenite:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
GB
II. FEATURES OF THE DEVICE (PIC. 1)
A – Curling iron
A1 – ON/OFF switch
A2 – „+" button for temperature setting
A3 – „–" button for temperature setting
A4 – LED display
A5 – arrest ring
A6 – turning joint of the power supply
A7 – power cord
III. INSTRUCTIONS FOR USE
Remove all packing material, take out the appliance. Remove all possible adhesion foils,
stick-on labels or paper from the appliance.
ON/OFF switch
To turn the appliance ON/OFF, press and hold the switch A1.
Temperature adjustment
Set the required temperature using the A2 and A3 buttons. The temperature can be set
from 130 to 210 °C (in 10 °C increments). When heating up, the figure on the display is
flicking. Once the required temperature is achieved, the figure on the display remains on
steadily. The temperature set is maintained automatically.
Low temperature (130 °C) – for fine, bleached or damaged hair,
Medium temperature (150–180 °C) – for normal and wavy hair,
High temperature (210 °C) – for strong and rough hair.
Automatic switch OFF
Auto power off (60 min.).
Attaching and replacing attachments B, (pic. 2)
– The
arrow placed on the main body A must be directed towards an emplty arrow
which is placed on the arrest ring A5 in order that the parts fit in.
– Push gently to attach the desired attachment.
– Turn the arrest ring A5 in such a way that the full
the full
, arrow on the main body.
– Proceed reversedly when taking the atachments B off.
Hair styling
Use the hot comb on dry or slightly moist hair, never on wet hair. Comb the hair before
using the comb so that they are not tousled. The ending B5 stays cold during operation
and allows hair styling with both hands. Move the hot comb to the end of the hair and then
wind the lock in a desired direction with several turns. Do not wind locks too thick on the
tube when hair styling. Let the heat affect the hair for several seconds then unwind the lock
and release. Repeat the process until the desired hairstyle is achieved. Let the hair cool
down before final styling.
B – Accessories
C – Case
Temperature and type of hair
16
/ 34
B1 – tube ø 19 mm
B2 – tube ø 25 mm
B3 – tube ø 33 mm
B4 – conical tube ø 13/25 mm
B5 – ending
on the arrest ring is directed against
,

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis