cecotec Cumbia POWER MATIC-CCINO 9000-Serie Bedienungsanleitung Seite 55

ENGLISH
Cleaning of the milk frother (3)
When "Cleaning of the milk system" is displayed in the screen, press Ok. This will be displayed
after having used milk.
Place the milk frother as shown on the second drawing.
Press Ok to start the milk system automatic cleaning.
Fig. 30
Note: During the cleaning process, both the milk frother and the coffee outlet will emit hot
water and steam. Do not remove nor touch any part of the device when the cleaning is over.
Brewing unit (1) (Fig. 31)
Access the Settings menu and press Cleaning icon.
Tap on the Processor icon.
Pour cleaning agent into the brewing unit through the ground coffee inlet.
Press Ok to activate the cleaning cycle.
The machine will return to standby mode once the cleaning is completed.
Cleaning of the brewing unit (2)
Open the right door.
Remove the waste container.
Remove the brewing unit by pressing the tab with your thumb and pulling outwards. Rinse it
with abundant hot water.
Use the brush to remove possible coffee remains.
Insert the brewing unit back to its position. Wait until your hear a click to make sure it is placed
correctly.
Fig. 32
it is suggested to clean the grinder every 350 coffees. On Settings, select Factory settings and
press "coffee meter" and it will display the number of coffees served.
In order to clean the grinder, follow these steps:
Open the right door.
Remove all the coffee beans from the deposit.
Restart the coffee machine by pressing the On/off button twice. (fig. 2- fig. 3)
When the image of the coffee machine is displayed on the screen, press the top left side until
the submenu pops up.
Remove the waste tank and the brewing unit to clean them manually. (fig. 5)
(fig. 5) Wash them under warm running water until removing all the scraps.
Place a big container under the coffee outlet. (fig. 6)
Turn right to maximum the coffee grinder knob. (fig. 7)
Pour the cleaning agent in the mill, the amount recommended by the manufacturer, in the
coffee bean deposit. (fig. 8)
Introduce the value "0" in the screen and press Ok repeatedly until no cleaning agent comes
POWER MATIC-CCINO 9000 SERIE NERA/BIANCA 55