b-intense Bedienungsanleitung Seite 54

In the standard setting you can see the program chosen for both seats "R/L" together.
If you want to select a different program for each seat, please proceed as follows. With
the symbols + and – you can choose you favourite program.
Once you have reached your desired programme in the list, use +/- to select
the seats:
 R+ L: if both users want the same programm
 R: for the right user (sitting in the cabin)
 L: for the left user
Press the program symbol
Program Login:
Select and confirm one of the infrared programs.
Note: It does not make any difference if you start with „R" or „L". The second user can
even sit later in the cabin and then start his desired program.
Now the display shows you the current status of the chosen program and informs you
about:
› Name of the program
› Choice of seat for the program*
› Remaining time of the program
› Current temperature in the cabin (only in cabins equipped with b-control deluxe)
› Current intensity of the back heater in the program progress
*The note R shows you the current status for the right place, the note L shows the
current status for the left seat. The note R/L shows you the status for both seats, in
case you chose the same program for both seats.
After that you can choose the user program for the second seat:
Press again the program symbol
and can now choose the program for the second seat with the symbols + and –.
Status display of the different seats:
After selecting the program for the second user location, the display shows the last
program logged in. Press the program button again to see the status of the other seat.
to confirm.
. You will directly get into the program selection
54