b-intense Bedienungsanleitung Seite 41

b-control units: application notes
b-intense
by the whole family (only older children).
The temperature in the b-intense
infrared cabin reaches between 25°
and 40°C.
Regulate the settings of your b-intense
100%
infrared cabin by slightly touching the
75% 25%
symbols on the b-control panel.
50%
The b-intense
100%
offer pre-programmed infrared programs
for selection such as back, heat load or
75% 25%
slim. See detailed description starting on
50%
page 20.
We recommend infrared sessions of
approx. 30-50 minutes, depending on
personal sensation or the choice of a
b-intense
60 minutes the cabin switches off
automatically.
The infrared radiation must strike the skin
directly. To do this, sit in the cabin with your
upper body naked so that your spine is po-
sitioned directly in front of the back radiator
and lean back. After about 10-15 minutes
you will usually start to sweat. Adjust the
neck support so that the radiation does not
hit the back of your head directly.
® infrared cabins can be used
®
infrared control units
®
infrared program. After
®
®
41
Please, use a towel while sitting in the
cabin.
A b-intense infrared cabin has no
®
warming up time. Sit down, turn on and
enjoy immediately.
Enjoy your b-intense
® infrared cabin
with pleasure if you want on a daily
basis.
After use, a tepid shower is recommend-
ed. We recommend additionally to cream
the skin with a caring and moisturizing
lotion.
Drink a glass of water before and after
each use of the infrared cabin! To
ensure an optimum sweat reaction,
consume sufficient water. Ideally water
consumption should be distributed
throughout the day.