b-intense Bedienungsanleitung Seite 44

b-control units: operation
In the middle of the control panel you will see the digital display. During the entire
period of use the current values in your cabin can be read in this field as follows:
› Session runtime in minutes
› Current cabin interior temperature in Degrees Celsius
on/off
back-
heater
front-
heater
floor heating
ventilation
infrared programs
Starting up your b-intense
You can turn on your b-intense
By switching on, the following basic settings are automatically activated:
› The back and front heater become active within 2–3 seconds. The front heater heats up to 80% of its output, the back heater to 50%.
The front heater can be adjusted at any time via the control panel. The back heater can be increased after the 5 minute warm-up phase,
but can be reduced from the start. The limit of 50% during the first 5 minutes allows the body to adjust optimally and gently to the heat
supply and to increase the efficiency of the application.
› LED coloured light
› Floor heating
b-control deluxe
infrared cabin
®
infrared cabin by touching the
®
display
light color
selection
music
back-
playback
heater
volume
audio sources
USB-port and loa-
ding station for your
external devices
(smartphone, mp3-
floor heating
player, etc.)
button (for approx. 1 sec.).
44
b-control basic
on/off
front-
heater
infrared programs
USB loading station
for your external
devices