b-intense Bedienungsanleitung Seite 52

Infrared programs LOGIN in a 1-person cabin
Press the program button
With the symbols + and – you can choose your favourite program. Confirm the desired infrared program with the program button.
The b-intense program selection contains:
®
b-control deluxe
1. PREHEATING 15 MIN
2. PREHEATING 30 MIN
3. HEAT LOAD
4. VITALISATION
5. BACK
6. REGENERATION
7. SLIM
 The display then starts from the beginning and you can click through
the program selection again.
 Please take notice that the specifications concerning the LED colour light
is only valid for the closed b-intense
with the LED-colour light and the b-control unit deluxe.
 If a program should be logged in unintentionally, you can change
within 10 minutes. After a running time of 10 minutes no more program
change is possible. Then you have to switch off the cabin and after the
"10 minute cool-down phase" you can restart the cabin.
Program Login:
After deciding for one user program, the display shows you the current status
of the chosen program and informs you about:
› Name of the program
› Remaining time of the program
› Current intensity of the back heater in the program progress
› Current temperature in the cabin (only in cabins equipped with b-control deluxe)
Note b-intense
® moments App: Self-created infrared programs are not stored
on the control unit. They can only be selected via the device on which you have
installed the app. If you select your self-created program via tablet or mobile phone,
the name "Custom" appears on the display of the control. The remaining parameters
are set as usual.
and enter the b-intense program menu.
®
b-control basic
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
infrared cabins that are equipped
®
52