b-intense Bedienungsanleitung Seite 53

Infrared programs LOGIN in a 2-person cabin
In a 2-person cabin you can choose a different program for each seat. Thus you can enjoy the heat for two; the program is, however, tailored
to your needs. Select a program and assign your selection to one place:
 „R/L" for both seats at the same time, „R" for right and „L" for left and this is how it works:
Press the program symbol
With the symbols + and – you can choose you favourite program.
The b-intense program selection contains:
®
b-control deluxe
1. PREHEATING 15 MIN
2. PREHEATING 30 MIN
3. HEAT LOAD
4. VITALISATION
5. BACK
6. REGENERATION
7. SLIM
 The display then starts from the beginning and you can click through the program
selection again.
 Please take notice that the specifications concerning the LED colour light is only valid
for the closed b-intense
light and the b-control unit deluxe.
 If a program should be logged in unintentionally, you can change within 10 min-
utes. After a running time of 10 minutes no more program change is possible. Then
you have to switch off the cabin and after the "10 minute cool-down phase" you can
restart the cabin.
Note b-intense
® moments App: Self-created infrared programs are not stored
on the control unit. They can only be selected via the device on which you have
installed the app. If you select your self-created program via tablet or mobile
phone, the name "Custom" appears on the display of the control. The remaining
parameters are set as usual.
and enter the b-intense
®
b-control basic
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
® infrared cabins that are equipped with the LED-colour
program menu.
53