Sony VPL-FE40 Kurzreferenz Seite 22

To connect a computer (Digital) or video equipment (Digital)
a Plug the AC power cord into a wall outlet.
b Connect the projector to a computer or video equipment.
• Be sure to use the HDMI cable with an HDMI logo.
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital)
Signal or CEC (Consumer Electronics control) Signal.
6
GB
Projecting
1
1
HDMI-DVI-D cable
(not supplied)
2
2
HDMI cable (not
supplied)