Extracting The Current Transmitter Parameters; Editing The Transmitter Parameters; Transferring New Parameters To The Transmitter - JUMO Wtrans p Betriebsanleitung

6.4.2

Extracting the current transmitter parameters

Step
1
2
3
4
5
6
7
8
6.4.3

Editing the transmitter parameters

Step
1
2
3
4
6.4.4

Transferring new parameters to the transmitter

Step
1
2
Activity
In the "File" menu, select the "New" function.
The "Device assistant" starts.
Confirm the "User-defined setting" by clicking the "Next" button.
Select the "Frequency band" and confirm with "Next".
Select the receiver variant and confirm by clicking "Next".
Exit the overview of the selected settings by clicking "Finish".
The current settings are displayed in the setup program.
Select the desired transmitter from the navigation tree by left-clicking it.
In the "Data transfer" menu, select the "Data transfer from device" function.
Exit the "Save file" prompt by clicking "Skip".
The current transmitter parameters are imported to the setup program.
Activity
In the navigation tree, select the transmitter to be edited by left-clicking it twice.
The "Transmitter configuration" is opened.
Edit the desired parameters.
Exit the editing procedure with "OK".
Save the parameters in the "File" menu with the "Save" function.
Activity
In the "Data transfer" menu, select the "Data transfer to device" function.
The current parameters are transmitted to the transmitter.
End the communication between the setup program and transmitter in the "Data transfer"
menu using the "Disconnect connection" function.
6 Setup program
33