JUMO Wtrans p Betriebsanleitung Seite 57

492 0 to 6 bar absolute pressure
493 0 to 10 bar absolute pressure
494 0 to 16 bar absolute pressure
495 0 to 25 bar absolute pressure
998 Special measuring range for absolute pressure
999 Special measuring range for relative pressure
(4) Radio frequency
10 868.4 MHz (Europe)
(5) Process connection
502 G 1/4 DIN EN 837
504 G 1/2 DIN EN 837
511 1/4-18 NPT DIN EN 837
512 1/2-14 NPT DIN EN 837
521 G 1/4 DIN 3852-11
523 G 1/2 DIN 3852-11
562 7/16-20 UNF
567 G 1/4 inside
571 G 3/4 flush-mounted
574 G 1/2 flush-mounted with double seal
575 G 3/4 flush-mounted with double seal
583 M20 × 1.5 with pin
997 JUMO PEKA with EHEDG certification
998 Suitable for connection to pressure separator
999 For other process connections please inquire
(6) Process connection material
20 Stainless steel
(7) Extra codes
000 None
100 Customer-specific configuration (specification in plain text)
591 Choke in the pressure channel
634 TAG number
a
The process connection 571 can only be supplied for inputs (measuring range) up to 40 bar.
b
The process connection 574 can only be supplied for inputs (measuring range) up to 40 bar.
c
The process connection 575 can only be supplied for inputs (measuring range) up to 40 bar.
d
The process connection 583 can only be supplied for inputs (measuring range) up to 40 bar.
e
The process connection 997 can only be supplied for inputs (measuring range) up to 40 bar.
f
The customer-specific configuration only applies to the transmission interval (0.5 to 3600 s, factory setting 5 s). The
transmission interval can also be set using the setup program (see accessories).
2 Identifying the device version
a
b
c
d
e
f
15