Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- Prepare the appliance accor-
ding to the function you wish
to use.
USE:
- Connect the appliance to the
mains.
- Turn the appliance on using
the on/off switch "A".
- Start the appliance by turning
on the speed regulator "B"
- The display (G) will light up.
- Select the desired temperature
using "E" and "F". Once the
desired temperature has been
reached, the fan will continue
to operate without heating
mode for 1 minute after it
stops.
- Select the desired ventilation
speed by pressing both "D"
and "E", "LL" (Low) low and
"HH" (high) for high.
TIMER FUNCTION:
- The appliance's operating time
can be controlled.
- To schedule an operating time
simply select it using (F).
- The set time or time remaining
will appear on the display (G).
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
- Stop the appliance, by acti-
vating "B" and "A" for its total
disconnection.
- The fan will remain in opera-
tion during 60 seconds to cool
the appliance before its total
stop to avoid burns.
- Unplug the appliance from the
mains..
- Clean the appliance
SAFETY THERMAL PROTEC-
TOR:
- The appliance has a safety
device, which protects the
appliance from overheating.
- When the appliance switches
itself on and off repeatedly,
for reasons other than the ther-
mostat control, check to ensu-
re that there are no obstacles
that impede correct air entry or
expulsion.
- If the appliance turns itself
off and does not switch itself
on again, disconnect it from
the mains supply, and wait
for approximately 15 minutes
before reconnecting. If the
machine does not start again
seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from
the mains and let it cool before
undertaking any cleaning task.
- Clean the equipment with a
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
