Maintenance And Cleaning; Accessories; Warranty - IKA RH basic 2 Betriebsanleitung

Maintenance and Cleaning

The device is maintenance-free. It is only subject to the natural wear and tear of
components and their statistical failure rate.
Cleaning
› For cleaning disconnect the mains plug!
› Use only cleaning agents which have been approved by IKA to clean IKA
devices.
These are water (with tenside) and isopropanol.
› Wear protective gloves during cleaning the devices.
› Electrical devices may not be placed in the cleansing agent for the purpose of
cleaning.
› Do not allow moisture to get into the device when cleaning.
› Before using another than the recommended method for cleaning or
decontamination, the user must ascertain with IKA that this method does not
destroy the device.
Version RH basic KT/C and RH digital KT/C
Information for Care and Maintenance of the Heating Plate with Technical
Enamel Coating
The technical enamel makes the heating plate easier to care fort and more
resistant to acids and bases. Because of it, however, the heating plate is also
more susceptible to extreme fluctuations in temperature and the force of
impact. This can result in cracks forming or the coating flaking off.
Make certain that the bottom of the placing vessel is even, clean and dry. The
bottom of the placing vessel must not have any sharp grooves, sides or edges.
We recommend most strongly that you clean the heating plate regularly.
Spare parts order
› When ordering spare parts, please give:
- device type.
- serial number, see type plate.
- position number and description of spare part, see www.ika.com.
- software version.
Repair
› Please only send devices in for repair that have been cleaned and are free of
materials which might present health hazards.
› For repair, please request the "Safety Declaration (Decontamination
Certificate)" from IKA or use the download printout of it from IKA website at
www.ika.com.
› If your appliance requires repair, return it in its original packaging. Storage
packaging is not sufficient when sending the device - also use appropriate
transport packaging.

Accessories

RS 1 set of stirring bars H16 V
RSE PTFE stirring bar remover
Recommended IKA-stirrers
TRIKA-stirring bars: PTFE, triangular, length 55 mm
IKAFLON-stirring bars: PTFE diameter 8 mm, lengths 25, 30, 40 and 50 mm
For more accessories see www.ika.com.

Warranty

In accordance with IKA warranty conditions, the warranty period is 24 months.
For claims under the warranty please contact your local dealer. You may also send
the machine direct to our works, enclosing the delivery invoice and giving reasons
for the claim. You will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to faults resulting
from unintended use or insufficient care and maintenance contrary to the instruc-
tions in this operating manual.
support rod
17